How to Update Samsung Galaxy NOTE with Official XXLC2 Gingerbread 2.3.6 Firmware

Those who have not update their Samsung Galaxy Note with XXLC2 Gingerbread 2.3.6 firmware now can easily update as we recently found this firmware on SamMobile and like earlier posts we are not going to explain each every process but will link this post to our new page which will explain you how to update the Official XXLC2 Gingerbread 2.3.6 Firmware on your Samsung Galaxy Note N7000 and this update is for Indonesia, Malaysia, Thailand, Philippines and Vietnam. In this post we are providing you the link for downloading the file and then procedure to back up your Samsung Galaxy note N7000 and then you will be headed over to our page wherein you may see how to update the firmware on your Galaxy Note. now let ys not waste time and quickly move on to article on updating Official XXLC2 Gingerbread 2.3.6 Firmware on Samsung galaxy note N 7000 below,

Disclaimer

Rooting voids warranty and you need to do this at your own risk and we would not be held responsible if anything goes wrong, however chances of happening this is really less if you follow all the instructions mentioned below and from the article.

Take back up

Take back up of SMS: click HERE.

Take back up of videos, images, songs: Take back up on either internal or external SD card.

Take back up of call log: click HERE

Make sure you are installing only on Samsung galaxy Note N 700 and battery is 70% charged and now once this is done after downloading the ROM from below move to this article from below link,

Also make sure you have enabled USB debugging in your phone and for that you may follow setting< applications < USB debugging,

Download Official XXLC2 Gingerbread 2.3.6 Firmware

Download Official XXLC2 Gingerbread 2.3.6 Firmware file from below as per your country.

Download from here

To update the official ROM you need to get in to download mode now open Odin and connect your Samsung Galaxy Note and once you connect it in odin ID: COM will turn yellow and this means your Galaxy Note is well-connected to the Odin.

Now in Odin in Bootloader select SPH-D720_IMM76D_KE1_BOOTLOAD_signed.tar, in PDA select SPH-D720_IMM76D_PDA_signed.tar, in Phone select SPH-D720_IMM76D_LC1_Modem_signed.tar. Now once all this done click on START and wait for the installation to take place and then once it is done your Samsung Galaxy Note will restart and then you need to get your Samsung Galaxy Note in to recovery mode.

Note: Usually there would be three files then you need to select files as mentioned above and just in case there is only one file then select only in PDA.

In recovery mode tap on Wipe data/factory reset and then Wipe Cache partition and then reboot your phone and just in case if the installation stops then remove the battery, reinsert it and you will be able to do it.

Tags: Galaxy Note ROM

Category: Flash, How to, ROM update, Samsung Galaxy Note ROM, Update